DatasheetsPDF.com

Object Sensor. OPB701ALZ Datasheet

DatasheetsPDF.com

Object Sensor. OPB701ALZ Datasheet
















OPB701ALZ Sensor. Datasheet pdf. Equivalent













Part

OPB701ALZ

Description

Reflective Object Sensor



Feature


Reflective Object Sensor OPB700Z, OPB700 ALZ OPB701Z, OPB701ALZ Features: • Lo w profile to facilitate stacking • Lo w cost plastic housing • Choice of ph ototransistor or photodarlington output • #26 AWG lead wire in 4” (101 mm) , or 18” (457 mm) lengths Descriptio n: OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NP N silicon phototransistor, mou.
Manufacture

TT

Datasheet
Download OPB701ALZ Datasheet


TT OPB701ALZ

OPB701ALZ; nted side-byside on converging optical a xes in a black plastic housing. OPB701 and OPB701ALZ sensors consist of an in frared emitting diode and a NPN silicon photodarlington, mounted side-byside o n converging optical axes in a black pl astic housing. The interconnect wires for these devices are are UL approved # 26 AWG, with Teflon insulation, strippe d and tinned. The .


TT OPB701ALZ

OPB700 and OPB701 have 4” (101 mm) wir e length while the OPB700ALZ and OPB701 ALZ have 18” (457 mm) wire length. C ustom electrical, wire, cabling and con nectors are available. Contact your loc al representative or OPTEK for more inf ormation. Applications: • Non-conta ct reflective object sensor • Assemb ly line automation • Machine automat ion • Machine safety • End .


TT OPB701ALZ

of travel sensor Part Number • Door sensor OPB700Z OPB700ALZ OPB701Z OP B701ALZ LED Peak Wavelength 890 nm Or dering Information Sensor Reflection Distance Inch (mm) Transistor Darlingt on 0.200" (5.08mm) Lead Length / Spac ing 4" / 26 AWG Wire 18" / 26 AWG Wire 4" / 26 AWG Wire 18" / 26 AWG Wire RoH S General Note TT Electronics reserves the right to make c.





Part

OPB701ALZ

Description

Reflective Object Sensor



Feature


Reflective Object Sensor OPB700Z, OPB700 ALZ OPB701Z, OPB701ALZ Features: • Lo w profile to facilitate stacking • Lo w cost plastic housing • Choice of ph ototransistor or photodarlington output • #26 AWG lead wire in 4” (101 mm) , or 18” (457 mm) lengths Descriptio n: OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NP N silicon phototransistor, mou.
Manufacture

TT

Datasheet
Download OPB701ALZ Datasheet




 OPB701ALZ
Reflective Object Sensor
OPB700Z, OPB700ALZ
OPB701Z, OPB701ALZ
Features:
Low profile to facilitate stacking
Low cost plastic housing
Choice of phototransistor or photodarlington output
#26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths
Description:
OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NPN silicon phototransistor, mounted side-by-
side on converging optical axes in a black plastic housing.
OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and a NPN silicon photodarlington, mounted side-by-
side on converging optical axes in a black plastic housing.
The interconnect wires for these devices are are UL approved #26 AWG, with Teflon insulation, stripped and tinned. The
OPB700 and OPB701 have 4” (101 mm) wire length while the OPB700ALZ and OPB701ALZ have 18” (457 mm) wire length.
Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more
information.
Applications:
Non-contact reflective object sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Part Number
Door sensor
OPB700Z
OPB700ALZ
OPB701Z
OPB701ALZ
LED Peak
Wavelength
890 nm
Ordering Information
Sensor
Reflection Distance
Inch (mm)
Transistor
Darlington
0.200" (5.08mm)
Lead Length /
Spacing
4" / 26 AWG Wire
18" / 26 AWG Wire
4" / 26 AWG Wire
18" / 26 AWG Wire
RoHS
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronicsown data and is
considered accurate at time of going to print.
© TT electronics plc
Form # 500-1080-001 Rev - 06/2019
TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 12/2019 Page 1




 OPB701ALZ
Reflective Object Sensor
OPB700Z, OPB700ALZ
OPB701Z, OPB701ALZ
OPB700Z, OPB701Z
See Chart
Reflective Surface
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
Reflective Surface
3
42
1
Part Number
OPB700Z
OPB700ALZ
OPB701Z
OPB701ALZ
Wire Length
4” Min
18” Min
4” Min
18” Min
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronicsown data and is
considered accurate at time of going to print.
© TT electronics plc
Form # 500-1080-001 Rev - 06/2019
3
42
1
Color/Pin #
Red-3
Black-4
OPB701
LED Color/Pin #
Anode
White-2
Cathode
Green-1
LED
Collector
Emitter
TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 12/2019 Page 2




 OPB701ALZ
Reflective Object Sensor
OPB700Z, OPB700ALZ
OPB701Z, OPB701ALZ
Electrical Specifications
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature
Input Diode
Continuous Forward Current
Reverse Voltage
Power Dissipation(1)
Output Phototransistor
Collector-Emitter Voltage
OPB700Z, OPB700ALZ
OPB70Z1, OPB701ALZ
Emitter-Collector Voltage
Power Dissipation(1)
Notes:
(1) Derate linearly 1.07 mW/°C above 25 ° C.
-40° C to + 125° C
-40° C to + 100° C
260° C
100 mA
2V
80 mW
24 V
15 V
5V
50 mW
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
VF Forward Voltage
-
- 1.7
V IF = 50 mA
IR Reverse Current
Output Phototransistor
-
- 100 µA VR = 2 V
Collector-Emitter Breakdown Voltage
V(BR)CEO
OPB700Z, OPB700ALZ
25 -
-
OPB701Z, OPB701ALZ
15 -
-
V IC = 100 µA
V IC = 100 µA
V(BR)ECO Emitter-Collector Breakdown Voltage
5
-
-
V IE = 100 µA
Collector Dark Current
ICEO
OPB700Z, OPB700ALZ
OPB701Z, OPB701ALZ
-
-
100
nA VCE = 10 V, IF = 0, EE = ≤0.1 µW/cm2
-
-
250
nA VCE = 10 V, IF = 0, EE = ≤0.1 µW/cm2
Notes:
(1) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog # E
152 7795.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronicsown data and is
considered accurate at time of going to print.
© TT electronics plc
Form # 500-1080-001 Rev - 06/2019
TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 12/2019 Page 3




Recommended third-party OPB701ALZ Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)