DatasheetsPDF.com

Front-End Module. SE5007T Datasheet

DatasheetsPDF.com

Front-End Module. SE5007T Datasheet
















SE5007T Module. Datasheet pdf. Equivalent













Part

SE5007T

Description

5GHz Front-End Module



Feature


DATA SHEET SE5007T: 5 GHz Front End Modu le with Power Detector Applications ο‚ § 5 GHz WLAN (IEEE802.11a/g/n)  Acce ss Points, PCMCIA, PC cards Features ο‚ § 5GHz Front End Module with PA, LNA an d T/R Switch  Integrated power ampli fier enable pin (VEN)  Buffered, tem perature compensated power detector  High and Low-Linearity mode  3% EVM , @17dBm, 64 QAM, 54 Mbps  30 d.
Manufacture

Skyworks Solutions

Datasheet
Download SE5007T Datasheet


Skyworks Solutions SE5007T

SE5007T; B Typical Gain  Lead Free and RoHS co mpliant, halogen free package  16 pi n 3 mm x 3 mm x 0.6 mm QFN, MSL1 Order ing Information Part Number SE5007T SE 5007T-R SE5007T-EK1 Package 16 Pin QFN 16 Pin QFN Evaluation Kit Remark Samp les Tape and Reel Standard Product Des cription The SE5007T is a 5GHz front en d module offering high linear power for wireless LAN applicat.


Skyworks Solutions SE5007T

ions. It incorporates a power detector f or control of the output power. The SE5 007T offers a high level of integration for a simplified design, providing qui cker time to market and higher applicat ion board production yield. The device integrates the input match, inter-stage match, a temperature compensated, load insensitive power detector with 20dB o f dynamic range, a.


Skyworks Solutions SE5007T

3.8GHz notch filter, a T/R switch and L NA. For wireless LAN applications, the device meets the requirements of IEEE80 2.11a and delivers approximately 17dBm of linear output power. It also feature s a low linearity mode control to reduc e current consumption at low power mode s. The SE5007T integrates the reference voltage generator, allowing for a true 1.8V CMOS compati.





Part

SE5007T

Description

5GHz Front-End Module



Feature


DATA SHEET SE5007T: 5 GHz Front End Modu le with Power Detector Applications ο‚ § 5 GHz WLAN (IEEE802.11a/g/n)  Acce ss Points, PCMCIA, PC cards Features ο‚ § 5GHz Front End Module with PA, LNA an d T/R Switch  Integrated power ampli fier enable pin (VEN)  Buffered, tem perature compensated power detector  High and Low-Linearity mode  3% EVM , @17dBm, 64 QAM, 54 Mbps  30 d.
Manufacture

Skyworks Solutions

Datasheet
Download SE5007T Datasheet




 SE5007T
DATA SHEET
SE5007T: 5 GHz Front End Module with Power Detector
Applications
 5 GHz WLAN (IEEE802.11a/g/n)
 Access Points, PCMCIA, PC cards
Features
 5GHz Front End Module with PA, LNA and T/R
Switch
 Integrated power amplifier enable pin (VEN)
 Buffered, temperature compensated power
detector
 High and Low-Linearity mode
 3% EVM, @17dBm, 64 QAM, 54 Mbps
 30 dB Typical Gain
 Lead Free and RoHS compliant, halogen free
package
 16 pin 3 mm x 3 mm x 0.6 mm QFN, MSL1
Ordering Information
Part Number
SE5007T
SE5007T-R
SE5007T-EK1
Package
16 Pin QFN
16 Pin QFN
Evaluation Kit
Remark
Samples
Tape and Reel
Standard
Product Description
The SE5007T is a 5GHz front end module offering
high linear power for wireless LAN applications. It
incorporates a power detector for control of the output
power.
The SE5007T offers a high level of integration for a
simplified design, providing quicker time to market
and higher application board production yield. The
device integrates the input match, inter-stage match,
a temperature compensated, load insensitive power
detector with 20dB of dynamic range, a 3.8GHz notch
filter, a T/R switch and LNA.
For wireless LAN applications, the device meets the
requirements of IEEE802.11a and delivers
approximately 17dBm of linear output power. It also
features a low linearity mode control to reduce current
consumption at low power modes.
The SE5007T integrates the reference voltage
generator, allowing for a true 1.8V CMOS compatible
digital EN (enable) function to turn the power amplifier
on and off.
Functional Block Diagram
VCC1,2 DET H/L Lin
C0
EN
Bias, Enable, Detector Circuits
TXIN
Match
Match &
Filter
C1
ANT
RX
Figure 1: Functional Block Diagram
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00383  Rev 2.0 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012
1 of 11




 SE5007T
DATA SHEET
SE5007T: 5 GHz Front End Module with Power Detector
Pin Out Diagram
Pin Out Description
Figure 2: SE5007T Pin-Out Diagram
Pin
No.
Name
Description
1
EN PA Enable
2
GND Ground
3
TXIN 5GHz TX RF Input Signal
4
GND Ground
5
RX 5GHz LNA Output Signal
6
GND Ground
7
C0 Switch Control Logic 1
8
C1 Switch Control Logic 2
Pin
No.
Name
Description
9
VDD LNA Supply Voltage
10
GND Ground
11
ANT 5GHz Antenna output
12
GND Ground
13
DET Power Detector Output
14 H/L Lin High-Low linearity Control
15 VCC1 Power Stage Supply Voltage
16 VCC2 Bias, Driver Stage Supply Voltage
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00383  Rev 2.0 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012
2 of 11




 SE5007T
DATA SHEET
SE5007T: 5 GHz Front End Module with Power Detector
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings for a long period of time may
cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the
recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this
device should be at ESD protected workstations.
Symbol
Definition
VCC1
VDD, VCC2
EN
TXIN
TSTG
ESD HBM
Supply Voltage on pin 15 (VCC1)
Supply Voltage on pins 9, 16 (VDD, VCC2)
DC input on Enable
RF Input Power, RFout into 50Ω match
Storage Temperature Range
JEDEC JESD22-A114
all pins
Antenna Pin
All Other Pins
Recommended Operating Conditions
Symbol
Parameter
VCC1
VDD, VCC2
TA
Supply Voltage on pin 15 (VCC1)
Supply Voltage on pins 9, 16 (VDD, VCC2)
Ambient Temperature
Min.
3.0
3.0
-0.3
-
-40
-
-
Max.
4.8
3.6
3.6
12
150
1000
300
Unit
V
V
V
dBm
Β°C
V
Min.
3.0
3.0
-40
Max.
Unit
4.5
V
3.6
V
85
Β°C
Control Logic Characteristics
Conditions: VCC1 = VCC2 = VDD = VPAON = VEN = 3.3 V, TA = 25 Β°C, as measured on Skyworks Solutions’ SE5007T-
EV1 evaluation board, unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
POUT = 17 dBm, 54 Mbps, 64 QAM,
H/L Lin = 3.3V (High Linearity Mode)
-
195
-
Supply Current,
POUT = 13 dBm, 54 Mbps, 64 QAM,
H/L Lin = 0V (Low Linearity Mode)
-
140
-
Transmit Mode
ICC-802.11a
POUT = 5 dBm, 54 Mbps, 64 QAM,
H/L Lin = 0V (Low Linearity Mode)
-
105
-
mA
POUT = 19 dBm, 54 Mbps, 64 QAM,
H/L Lin = 3.3V, VCC1 = 4.0V
220
Supply Current,
Receive Mode
VEN = C0 = 0V; C1 = 3.3V
VEN = C0 = C1 = 0V
15
0.02
IOFF
Supply Current
VEN = 0 V, No RF, C0=C1=0 V
Measured on VCC, VDD pins
-
20
50
ΞΌA
VENH Logic High Voltage
-
1.6
-
3.6
V
VENL
Logic Low Voltage
-
-0.3
-
0.3
V
IENH
Input Current Logic
-
-
330
400
ΞΌA
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00383  Rev 2.0 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012
3 of 11




Recommended third-party SE5007T Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)