DatasheetsPDF.com

INVERTER BUFFER/DRIVER. SN74AUC1G06 Datasheet

DatasheetsPDF.com

INVERTER BUFFER/DRIVER. SN74AUC1G06 Datasheet






SN74AUC1G06 BUFFER/DRIVER. Datasheet pdf. Equivalent




SN74AUC1G06 BUFFER/DRIVER. Datasheet pdf. Equivalent





Part

SN74AUC1G06

Description

SINGLE INVERTER BUFFER/DRIVER



Feature


www.ti.com FEATURES • Available in the Texas Instruments NanoStar™ and Nano Free™ Packages • Optimized for 1.8- V Operation and Is 3.6-V I/O Tolerant t o Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mod e Operation • Sub-1-V Operable • Ma x tpd of 2.5 ns at 1.8 V SN74AUC1G06 S INGLE INVERTER BUFFER/DRIVER WITH OPEN- DRAIN OUTPUT SCES372M – SEPTEMBE.
Manufacture

Texas Instruments

Datasheet
Download SN74AUC1G06 Datasheet


Texas Instruments SN74AUC1G06

SN74AUC1G06; R 2001 – REVISED FEBRUARY 2007 • Low Power Consumption, 10-µA Max ICC • ±8-mA Output Drive at 1.8 V • Latch- Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A 114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DESCRIPTION/ORDERING INFORMATION This single inverter buffer/driver is op.


Texas Instruments SN74AUC1G06

erational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.9 5-V VCC operation. The output of the SN 74AUC1G06 is open drain and can be conn ected to other open-drain outputs to im plement active-low wired-OR or active-h igh wired-AND functions. TA –40 C to 85 C ORDERING INFORMATION PACKAGE (1 ) ORDERABLE PART NUMBER NanoFree™ WCSP (DSBGA) 0.23-mm .


Texas Instruments SN74AUC1G06

Large Bump – YZP (Pb-free) Reel of 30 00 SN74AUC1G06YZPR SOT (SOT-23) – DB V Reel of 3000 SN74AUC1G06DBVR SOT (S C-70) – DCK Reel of 3000 SN74AUC1G06 DCKR TOP-SIDE MARKING(2) _ _ _UT_ U06_ UT_ (1) Package drawings, standard pa cking quantities, thermal data, symboli zation, and PCB design guidelines are a vailable at www.ti.com/sc/package. (2) DBV/DCK: The actual top-.

Part

SN74AUC1G06

Description

SINGLE INVERTER BUFFER/DRIVER



Feature


www.ti.com FEATURES • Available in the Texas Instruments NanoStar™ and Nano Free™ Packages • Optimized for 1.8- V Operation and Is 3.6-V I/O Tolerant t o Support Mixed-Mode Signal Operation Ioff Supports Partial-Power-Down Mod e Operation • Sub-1-V Operable • Ma x tpd of 2.5 ns at 1.8 V SN74AUC1G06 S INGLE INVERTER BUFFER/DRIVER WITH OPEN- DRAIN OUTPUT SCES372M – SEPTEMBE.
Manufacture

Texas Instruments

Datasheet
Download SN74AUC1G06 Datasheet




 SN74AUC1G06
www.ti.com
FEATURES
Available in the Texas Instruments
NanoStar™ and NanoFree™ Packages
Optimized for 1.8-V Operation and Is 3.6-V I/O
Tolerant to Support Mixed-Mode Signal
Operation
Ioff Supports Partial-Power-Down Mode
Operation
Sub-1-V Operable
Max tpd of 2.5 ns at 1.8 V
SN74AUC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES372M – SEPTEMBER 2001 – REVISED FEBRUARY 2007
Low Power Consumption, 10-µA Max ICC
• ±8-mA Output Drive at 1.8 V
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
This single inverter buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to
1.95-V VCC operation.
The output of the SN74AUC1G06 is open drain and can be connected to other open-drain outputs to implement
active-low wired-OR or active-high wired-AND functions.
TA
–40 C to
85 C
ORDERING INFORMATION
PACKAGE (1)
ORDERABLE PART NUMBER
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZP
(Pb-free)
Reel of 3000 SN74AUC1G06YZPR
SOT (SOT-23) – DBV
Reel of 3000 SN74AUC1G06DBVR
SOT (SC-70) – DCK
Reel of 3000 SN74AUC1G06DCKR
TOP-SIDE MARKING(2)
_ _ _UT_
U06_
UT_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, = Pb-free).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar, NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2007, Texas Instruments Incorporated




 SN74AUC1G06
SN74AUC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES372M – SEPTEMBER 2001 – REVISED FEBRUARY 2007
www.ti.com
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the
die as the package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
For more information about AUC Little Logic devices, please refer to the TI application report, Applications of
Texas Instruments AUC Sub-1-V Little Logic Devices, literature number SCEA027.
FUNCTION TABLE
INPUT
A
H
L
OUTPUT
Y
L
H
LOGIC DIAGRAM (POSITIVE LOGIC)
A2
4Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
VCC
Supply voltage range
VI
Input voltage range(2)
VO
Output voltage range(2)
IIK
Input clamp current
IOK
Output clamp current
IO
Continuous output current
Continuous current through VCC or GND
θJA
Package thermal impedance(3)
Tstg
Storage temperature range
VI < 0
VO < 0
DBV package
DCK package
YZP package
MIN
MAX
–0.5
3.6
–0.5
3.6
–0.5 VCC + 0.5
–50
–50
±20
±100
206
252
132
–65
150
UNIT
V
V
V
mA
mA
mA
mA
C/W
C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback




 SN74AUC1G06
www.ti.com
Recommended Operating Conditions(1)
SN74AUC1G06
SINGLE INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUT
SCES372M – SEPTEMBER 2001 – REVISED FEBRUARY 2007
VCC
Supply voltage
VIH
High-level input voltage
VIL
Low-level input voltage
VI
Input voltage
VO
Output voltage
IOL
Low-level output current
t/v Input transition rise or fall rate
TA
Operating free-air temperature
VCC = 0.8 V
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 0.8 V
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 0.8 V
VCC = 1.1 V
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 0.8 V to 1.6 V
VCC = 1.65 V
VCC = 2.3 V
MIN
MAX UNIT
0.8
2.7 V
VCC
0.65 VCC
V
1.7
0
0.35 VCC V
0.7
0
3.6 V
0
3.6 V
0.7
3
5 mA
8
9
20
10 ns/V
5
–40
85
C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
VOL
II
A input
Ioff
ICC
Ci
IOL = 100 µA
IOL = 0.7 mA
IOL = 3 mA
IOL = 5 mA
IOL = 8 mA
IOL = 9 mA
VI = VCC or GND
VI or VO = 2.7 V
VI = VCC or GND,
VI = VCC or GND
TEST CONDITIONS
IO = 0
VCC
0.8 V to 2.7 V
0.8 V
1.1 V
1.4 V
1.65 V
2.3 V
0 to 2.7 V
0
0.8 V to 2.7 V
2.5 V
(1) All typical values are at TA = 25 C.
MIN TYP(1) MAX
0.2
0.25
0.3
0.4
0.45
0.6
±5
±10
10
3
UNIT
V
µA
µA
µA
pF
Switching Characteristics
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 0.8 V
TYP
VCC = 1.2 V VCC = 1.5 V
± 0.1 V
± 0.1 V
MIN MAX MIN MAX
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
MIN TYP MAX MIN MAX
tpd
A
Y
5
0.3 3.1 0.2 2.4 0.2 1.4 2.5 0.2 1.7
UNIT
ns
Submit Documentation Feedback
3



Recommended third-party SN74AUC1G06 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)