DatasheetsPDF.com

VOLT REFERENCE. 5962-8551401 Datasheet

DatasheetsPDF.com

VOLT REFERENCE. 5962-8551401 Datasheet






5962-8551401 REFERENCE. Datasheet pdf. Equivalent




5962-8551401 REFERENCE. Datasheet pdf. Equivalent





Part

5962-8551401

Description

VOLT REFERENCE



Feature


www.DataSheet4U.com REVISIONS LTR A DES CRIPTION Change to military drawing for mat. Changes to output adjustment range . Add conditions for load regulation te st at -55°C and +125°C. Change group A subgroups for load regulation and lin e regulation tests, and output voltage temperature coefficient. Add vendor CAG E 64155. Editorial changes throughout. Add vendor CAGE 0793.
Manufacture

Analog Devices

Datasheet
Download 5962-8551401 Datasheet


Analog Devices 5962-8551401

5962-8551401; 3. Add vendor CAGE 54186. Add case outli ne 2. Change output voltage temperature coefficient test limits. Add device ty pe 02. Editorial changes throughout. De lete vendors CAGEs 54186 and 07933. Add vendor CAGE 1ES66. Add class V devices . Replace CAGE 06665 with 24355. Add ca se outline H and TABLE IIB. Make change s to 1.2.2 and TABLE II. Add radiation hardness assurance.


Analog Devices 5962-8551401

requirements. - ro Make changes to 1.5, table IIA, 4.4.1b, and output voltage temperature coefficient test as specifi ed in table I. - ro Add device types 03 and 04. Make changes 1.2.2 and to the output voltage noise test as specified under TABLE I. - ro Drawing updated to reflect current requirements. -rrp DATE (YR-MO-DA) 88-03-17 APPROVED M. A. FRY E B 89-04-12 M..


Analog Devices 5962-8551401

A. FRYE C 92-11-25 M. A. FRYE D 97 -06-10 R. MONNIN E F 98-08-07 00-01- 21 R. MONNIN R. MONNIN G 01-02-07 R . MONNIN H 05-12-07 R. MONNIN THE O RIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. DataShee DataSheet4U. com CURRENT CAGE CODE 67268 REV SHEET R EV SHEET REV STATUS OF SHEETS PMIC N/A REV SHEET H 1 H 2 H 3 H 4 H 5 H 6 H 7 H 8 H 9 H 10 PREPA.

Part

5962-8551401

Description

VOLT REFERENCE



Feature


www.DataSheet4U.com REVISIONS LTR A DES CRIPTION Change to military drawing for mat. Changes to output adjustment range . Add conditions for load regulation te st at -55°C and +125°C. Change group A subgroups for load regulation and lin e regulation tests, and output voltage temperature coefficient. Add vendor CAG E 64155. Editorial changes throughout. Add vendor CAGE 0793.
Manufacture

Analog Devices

Datasheet
Download 5962-8551401 Datasheet




 5962-8551401
www.DataSheet4U.com
REVISIONS
LTR
DESCRIPTION
DATE (YR-MO-DA)
A Change to military drawing format. Changes to output adjustment range. Add
conditions for load regulation test at -55°C and +125°C. Change group A
subgroups for load regulation and line regulation tests, and output voltage
temperature coefficient. Add vendor CAGE 64155. Editorial changes
throughout.
B Add vendor CAGE 07933. Add vendor CAGE 54186. Add case outline 2.
Change output voltage temperature coefficient test limits.
C Add device type 02. Editorial changes throughout. Delete vendors CAGEs
54186 and 07933. Add vendor CAGE 1ES66.
D Add class V devices. Replace CAGE 06665 with 24355. Add case outline H
and TABLE IIB. Make changes to 1.2.2 and TABLE II.
E Add radiation hardness assurance requirements. - ro
F Make changes to 1.5, table IIA, 4.4.1b, and output voltage temperature
coefficient test as specified in table I. - ro
G Add device types 03 and 04. Make changes 1.2.2 and to the output voltage
noise test as specified under TABLE I. - ro
H Drawing updated to reflect current requirements. -rrp
88-03-17
89-04-12
92-11-25
97-06-10
98-08-07
00-01-21
01-02-07
05-12-07
APPROVED
M. A. FRYE
M. A. FRYE
M. A. FRYE
R. MONNIN
R. MONNIN
R. MONNIN
R. MONNIN
R. MONNIN
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
DataSheet4U.com
CURRENT CAGE CODE 67268
DataShee
REV
SHEET
REV
SHEET
REV STATUS
OF SHEETS
REV
SHEET
HHHHHHHHHH
1 2 3 4 5 6 7 8 9 10
PMIC N/A
PREPARED BY
DONALD OSBORNE
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
DANIEL A. DiCENZO
APPROVED BY
N. A. HAUCK
DRAWING APPROVAL DATE
86-03-08
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
MICROCIRCUIT, LINEAR, RADIATION
HARDENED, +5 VOLT ADJUSTABLE PRECISION
VOLTAGE REFERENCE, MONOLITHIC SILICON
AMSC N/A
DataSheet4U.com
DSCC FORM 2233
APR 97
REVISION LEVEL
H
SIZE
A
SHEET
CAGE CODE
14933
1 OF 10
85514
5962-E061-06
DataSheet4 U .com




 5962-8551401
www.DataSheet4U.com
1. SCOPE
1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)
and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or
Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
1.2 PIN. The PIN is as shown in the following examples.
For device classes M and Q:
85514
01
G
X
Drawing number
Device type
(see 1.2.1)
For device class V:
5962
R 85514
Case outline
(see 1.2.2)
01
Lead finish
(see 1.2.3)
V
G
X
Federal
RHA
stock class
designator
designator
(see 1.2.1)
\
\/
Drawing number
/
Device
type
(see 1.2.2)
Device
class
designator
(see 1.2.3)
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
et4U.com
1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A
specified RHA levels and are marked with the approprDiaatetaRSHhAeedte4sUig.ncaotmor. A dash (-) indicates a non-RHA device.
DataShee
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type
Generic number
Circuit function
Output voltage noise
01
REF02A
Precision reference +5-volt
adjustable output
02
REF02
Precision reference +5-volt
adjustable output
03
REF02A
Precision reference +5-volt
adjustable output
04
REF02
Precision reference +5-volt
adjustable output
18 µVP-P
18 µVP-P
100 µVP-P
100 µVP-P
1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as listed
below. Since the device class designator has been added after the original issuance of this drawing, device classes M and Q
designators will not be included in the PIN and will not be marked on the device.
Device class
Device requirements documentation
M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-
JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A
Q or V
Certification and qualification to MIL-PRF-38535
STANDARD
MICROCIRCUIT DRAWING
DataSheet4U.com DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
DataSheet4 U .com
SIZE
A
REVISION LEVEL
H
85514
SHEET
2




 5962-8551401
www.DataSheet4U.com
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
G MACY1-X8
8
H
GDFP1-F10 or CDFP2-F10
10
P GDIP1-T8 or CDIP2-T8
8
2 CQCC1-N20
20
Can
Flat pack
Dual-in-line
Square leadless chip carrier
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings. 1/
Input voltage (VIN) ........................................................................................ 40 V dc
Power dissipation (PD) ................................................................................. 500 mW 2/
Output short circuit duration.......................................................................... Indefinite
Storage temperature..................................................................................... -65°C to +150°C
Lead temperature (soldering, 10 seconds) ................................................... +300°C
Junction temperature (TJ)............................................................................. +150°C
Thermal resistance, junction-to-case (θJC)................................................... See MIL-STD-1835
1.4 Recommended operating conditions.
Ambient operating temperature range (TA) .................................................. -55°C to +125°C
1.5 Radiation features.
et4U.com
Maximum total dose available (dose rate = 50 – 300 rads(Si)/s) ......................... 100 Krads(Si) 3/
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handDboaotakSs.hTeheet4fUol.locwoming specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DataShee
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ Derate 7.1 mW/°C above +80°C for the "G" and "H" packages, 6.6 mW/°C above +75°C for the "P" package, and
7.8 mW/°C above +72°C for the "2" package.
3/ These parts may be dose rate sensitive in a space environment and may demonstrate enhanced low dose rate effects.
Radiation end point limits for the noted parameters are guaranteed only for the conditions specified in MIL-STD-883,
method 1019, condition A.
STANDARD
MICROCIRCUIT DRAWING
DataSheet4U.com DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
DataSheet4 U .com
SIZE
A
REVISION LEVEL
H
85514
SHEET
3



Recommended third-party 5962-8551401 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)