DatasheetsPDF.com

Angle Header. 3793-5202 Datasheet

DatasheetsPDF.com

Angle Header. 3793-5202 Datasheet
















3793-5202 Header. Datasheet pdf. Equivalent













Part

3793-5202

Description

Angle Header



Feature


3M™ Four-Wall Header www.DataSheet4U.c om .100” × .100” Latch/Ejector, S traight and Right Angle 3000 Series Military (with 3M’s 3518 & N3518 polarizing key) and centerbump polariza tion • Optional ejector latches • Mounting holes for securing header to board • Optional polarizing posts av ailable • High temperature insulator option suitable for “no lead” solder.
Manufacture

3M

Datasheet
Download 3793-5202 Datasheet


3M 3793-5202

3793-5202; ing operations • High temperature opt ion suitable for reflow soldering usin g “paste in hole” techniques • S older tail option • See Regulatory I nformation Appendix for chemical compli ance information Date Modified: May 19, 2009 TS-0772-J Sheet 1 of 4 Physical Insulator: Material: Glass Filled Polye ster (PBT) Glass Filled Polyester (PCT) - (High Temp Option) Flammabi.


3M 3793-5202

lity: UL 94V-0 Color: Gray (PBT), Beige (PCT), Black (PCT) Contact: Material: Copper Alloy Plating: Underplating: Ni ckel - Overall (See Ordering Informatio n) Wiping Area: 30 µ” [ 0.76 µm ] G old Solder Tails: Tin Lead or Matte Tin (See Ordering Information) Marking: 3 M Logo, Part Identification Number and Orientation Triangle Electrical Curren t Rating: 2 A (EIA 364.


3M 3793-5202

-70) Insulation Resistance: >1 × 109 Ω at 500 VDC Withstanding Voltage: 1,000 VRMS at Sea Level Environmental Tempe rature Rating: -55°C to +105°C Proces s Rating: 260°C - (High Temp PCT insul ator verson), single pass, (profile per J-STD-020C) (PBT insulator version), m aximum insulator temperature 191°C (so lder wave processonly) Moisture Sensit ivity Level: 1 (per J-ST.




Part

3793-5202

Description

Angle Header



Feature


3M™ Four-Wall Header www.DataSheet4U.c om .100” × .100” Latch/Ejector, S traight and Right Angle 3000 Series Military (with 3M’s 3518 & N3518 polarizing key) and centerbump polariza tion • Optional ejector latches • Mounting holes for securing header to board • Optional polarizing posts av ailable • High temperature insulator option suitable for “no lead” solder.
Manufacture

3M

Datasheet
Download 3793-5202 Datasheet




 3793-5202
3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
3000 Series
www.DataSheet4U.com
Military (with 3M’s 3518 & N3518 polarizing key)
and centerbump polarization
Optional ejector latches
Mounting holes for securing header to board
Optional polarizing posts available
High temperature insulator option suitable for “no
lead” soldering operations
High temperature option suitable for reflow soldering
using “paste in hole” techniques
Solder tail option
See Regulatory Information Appendix for chemical
compliance information
Date Modified: May 19, 2009
TS-0772-J
Sheet 1 of 4
Physical
Insulator:
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option)
Flammability: UL 94V-0
Color: Gray (PBT), Beige (PCT), Black (PCT)
Contact:
Material: Copper Alloy
Plating:
Underplating: Nickel - Overall (See Ordering Information)
Wiping Area: 30 µ” [ 0.76 µm ] Gold
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating: 2 A (EIA 364-70)
Insulation Resistance: >1 × 109 Ω at 500 VDC
Withstanding Voltage: 1,000 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: 260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)
(PBT insulator version), maximum insulator temperature 191°C (solder wave
processonly)
Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373




 3793-5202
3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
www.DataSheet4U.com
-X0XX
Header without Latch Ejector
-X2XX
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
.08
[2.0]
.424 ± .010
[ 10.77 ]
.97 Ref
[24.6]
A
3000 Series
-X3XX
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.573 ± .010
[ 14.55 ]
1.07 Ref
[27.2]
.025 ± .002 Sq Typ
[ 0.64 ]
.24
[6.1]
.020
0.51
.37 Ref
[9.4]
D
.100
2.54
REF.
.46 Ref
[11.7]
.28
7.1
.30
[7.6]
CL Dim. E
“Y”
F Typ
Section A-A
(Straight)
.13
3.3
2X O .100 [2.54]
SEE NOTE #2
.100
2.54
REF.
POSITION #1
B
.025 ± .002 Sq Typ
[ 0.64 ]
Position 1
Orientation
Triangle
.21
[5.3]
Notch A
(See Table 1 & Note1)
Notch B
(See Table 1)
.16
[4.1]
A
Notch C
(See Table 1 & Note 1)
B
.25
6.4
.34
8.6
F Typ
CL “Y”
.24
[6.1]
.30
[7.6]
.68
[17.3]
.35
[8.9]
Dim. E
.049 Ref
[1.24]
.100 Ref
[2.54]
Section B-B
(Right Angle)
.020
[0.51]
2X ø .100
[2.54]
(See Note 2)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
.12
[3.0]
AC
A
B
.197
[5.00]
.20
[5.1]
C
TS-0772-J
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373




 3793-5202
3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
www.DataSheet4U.com
Pin Qty
3M Part
Number
A
Table 1
Dimensions
B
C
Polarizing
D Notches
10
3793
1.265 (32.13)
1.104 (28.04)
0.865 (21.97)
0.705 (17.91)
BC
14
3314
1.465 (37.21)
1.304 (33.12)
1.065 (27.05)
0.905 (22.99)
BC
16
3408
1.565 (39.75)
1.404 (35.66)
1.165 (29.59)
1.005 (25.53)
ABC
20
3428
1.765 (44.83)
1.604 (40.74)
1.365 (34.67)
1.205 (30.61)
ABC
24
3627
1.965 (49.91)
1.804 (45.82)
1.565 (39.75)
1.405 (35.69)
ABC
26
3429
2.065 (52.45)
1.904 (48.36)
1.665 (42.29)
1.505 (38.23)
ABC
30
3440
2.265 (57.53)
2.104 (53.44)
1.865 (47.37)
1.705 (43.31)
ABC
34
3431
2.465 (62.61)
2.304 (58.52)
2.065 (52.45)
1.905 (48.39)
ABC
40
3432
2.765 (70.23)
2.604 (66.14)
2.365 (60.07)
2.205 (56.01)
ABC
50
3433
3.265 (82.93)
3.104 (78.84)
2.865 (72.77)
2.705 (68.71)
ABC
60
3372
3.765 (95.63)
3.604 (91.54)
3.365 (85.47)
3.205 (81.41)
ABC
64
3764
3.965 (100.71)
3.804 (96.62)
3.565 (90.55)
3.405 (86.49)
ABC
3M Part
Number Suffix
Contact Tail
Dim E
Table 2
Pin Cross Section
Dim G
-5XX2
-6XX2
-5XO3
-6XO3
Solder Tail for
.062 (1.57)
Thick PC Board
Solder Tail for 0.94
(2.39) to .125 (3.18)
Thick PC Board
.112 ± .010
(2.84)
.155 ± .010
(3.94)
Dim F
.0245 ± .0005
(0.622)
.0245 ± .0005
(0.622)
Diagonals
.028 ± .001
(0.71)
.028 ± .001
(0.71)
Corner Radii
.0075 Ref
(0.191)
.0075 Ref
(0.191)
0.035 ± .003
(0.89) (See Note 3)
0.035 ± .003 (0.89)
3000 Series
Inch
(mm)
Tolerance Unless Noted
.0 .00 .000
Inch ± .1 ± .01 ± .005
[ ] Dimensions for
Reference only
ø.106 or ø.116
[2.69]
[2.95]
.300 (See Note 2)
[7.62]
Side to Side Stackability Dim G
ø.106 or ø.116
[2.69]
[2.95]
.41
[10.4]
(See Note 2)
Max to Edge of PCB
for Daisy Chain
Dim G
“Y” CL
"Y" CL
.060
[1.52]
Position 1
.100 ± .003
[2.54]
.100 ± .003
[2.54]
.352
[8.94]
B
Recommended Mounting Hole Pattern
(Straight)
.029
[0.74]
.100 ± .003
[2.54]
Position 1
.100 ± .003
[2.54]
.232
[5.89]
C
Recommended Mounting Hole Pattern
(Right Angle)
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle
version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used.
3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002. See page 4 for kink position details (K2
version).
4. Contact your 3M sales representative for custom requirements.
Ordering Information
X3XXX-XXXXXX
Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
N = High Temp Beige (PCT) /(Blank or UB Pltg. Req’d.)
N = High Temp Black (PCT)/(RB Plating Req’d)
3M Part Number
(See Table 1)
Pin Configuration
5 = Right Angle Solder Tails
6 = Straight Solder Tails
Latch/Ejector System
0 = No Latch/Ejector installed
2 = Short Roll Pin Latch/Ejectors
3 = Long Roll Pin Latch/Ejectors
5 = Short, Snap-In Latch/Ejectors
6 = Long, Snap-In Latch/Ejectors
Plating
RB = 30 μ” [ 0.76 μm ] Gold and 200 μ” [ 5.08 μm ] Matte Tin
over 100 μ” [ 2.54 μm ] Nickel (App. E1 & C1 Apply)
Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]
Tin Lead over 100 μ” [ 2.54 μm ] Nickel (App. E3 & C2 Apply)
Tail
02 = for .062 [1.57] thick board
03 = for .094 to .125 [2.39 to 3.18] thick board
K2 = kinked for .062 [1.57] thick board
TS-0772-J
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373




Recommended third-party 3793-5202 Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)